'name' => 'mobile_phone',
'display' => 'Mobile Phone'
);
- $e[] = array(
- 'type' => 'email',
- 'req' => true,
- 'name' => 'email',
- 'display' => 'Email'
- );
- $e[] = array(
- 'type' => 'email',
- 'req' => true,
- 'name' => 'email_rmv',
- 'display' => 'Verify Email'
- );
- if ($this->tableName == 'customer') {
- $add1 = 'add1';
- $add2 = 'add2';
- } else {
- $add1 = 'address';
- $add2 = 'address2';
- }
- $e[] = array(
- 'type' => 'text',
- 'req' => true,
- 'name' => $add1,
- 'display' => 'Address 1'
- );
- $e[] = array(
- 'type' => 'text',
- 'req' => false,
- 'name' => $add2,
- 'display' => 'Address 2'
- );
- $e[] = array(
- 'type' => 'text',
- 'req' => true,
- 'name' => 'city',
- 'display' => 'City'
- );
- $e[] = array(
- 'type' => 'select',
- 'req' => true,
- 'name' => 'state',
- 'display' => 'State/Province',
- 'opts' => $GLOBALS['states']
- );
- $e[] = array(
- 'type' => 'text',
- 'req' => true,
- 'name' => 'zip',
- 'display' => 'ZIP/Postal Code'
- );
+ // $e[] = array(
+ // 'type' => 'email',
+ // 'req' => true,
+ // 'name' => 'email',
+ // 'display' => 'Email'
+ // );
+ // $e[] = array(
+ // 'type' => 'email',
+ // 'req' => true,
+ // 'name' => 'email_rmv',
+ // 'display' => 'Verify Email'
+ // );
+ // if ($this->tableName == 'customer') {
+ // $add1 = 'add1';
+ // $add2 = 'add2';
+ // } else {
+ // $add1 = 'address';
+ // $add2 = 'address2';
+ // }
+ // $e[] = array(
+ // 'type' => 'text',
+ // 'req' => true,
+ // 'name' => $add1,
+ // 'display' => 'Address 1'
+ // );
+ // $e[] = array(
+ // 'type' => 'text',
+ // 'req' => false,
+ // 'name' => $add2,
+ // 'display' => 'Address 2'
+ // );
+ // $e[] = array(
+ // 'type' => 'text',
+ // 'req' => true,
+ // 'name' => 'city',
+ // 'display' => 'City'
+ // );
+ // $e[] = array(
+ // 'type' => 'select',
+ // 'req' => true,
+ // 'name' => 'state',
+ // 'display' => 'State/Province',
+ // 'opts' => $GLOBALS['states']
+ // );
+ // $e[] = array(
+ // 'type' => 'text',
+ // 'req' => true,
+ // 'name' => 'zip',
+ // 'display' => 'ZIP/Postal Code'
+ // );
$e[] = array(
'type' => 'text',
'req' => true,
'display' => 'Desired Completion Date'
);
$workTypes = array(
- 'Cleaning & Upkeep' => array(
+ '<center><u>Boat</u></center>' => array(
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Wash & Vacuum',
- 'opts' => 'Wash & Vacuum'
+ 'name' => 'Basic Clean',
+ 'opts' => '<div class="service-checkbox"><b>Basic Clean</b> - Wash exterior, wipe seats / dash, and vacuum main footprint of floor. Billing at $49.00 / hr.</div>',
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Deck & Hull Wax Only',
- 'opts' => 'Deck & Hull Wax Only'
+ 'name' => 'Detailed Clean',
+ 'opts' => '<div class="service-checkbox"><b>Detailed Clean</b> - Wash exterior, wipe complete interior of boat, clean seats (including use of mildew remover if necessary), apply 303 vinyl protectant, wash windows, and completely vacuum. Billing at $55.00 / hr.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Paint Bottom (with anti-fouling paint)',
- 'opts' => 'Paint Bottom (with anti-fouling paint)'
+ 'name' => 'Boat Wax',
+ 'opts' => '<div class="service-checkbox"><b>Boat Wax</b> - Full exterior wax on flat surfaces - may by coupled with cleaning. Billed at $55.00 / hr.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Clear & Oil Teak',
- 'opts' => 'Clear & Oil Teak'
+ 'name' => 'Inspection',
+ 'opts' => '<div class="service-checkbox"><b>Inspection</b> - Check (and replace as needed) lights, bilge pump, blower, fire extinguisher, horn, and dock lines. Dock lines will only be replaced if chaffed or frayed.</div>'
),
- array(
- 'type' => 'checkbox',
- 'req' => false,
- 'name' => 'Repair Navigation Lights, Blower, bilge pump, etc. (please specify below)',
- 'opts' => 'Repair Navigation Lights, Blower, bilge pump, etc. (please specify below)'
- ),
- array(
- 'type' => 'checkbox',
- 'req' => false,
- 'name' => 'Check Fire Extinguisher & Replace if Necessary',
- 'opts' => 'Check Fire Extinguisher & Replace if Necessary'
- ),
- array(
- 'type' => 'checkbox',
- 'req' => false,
- 'name' => 'Detail Cabin (Larger Vessels)',
- 'opts' => 'Detail Cabin (Larger Vessels)'
- )
),
- 'Engine' => array(
+ '<center><u>Engine Care</u></center>' => array(
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Basic Check (Hoses, Steering, Battery, Fuel Tanks, etc.)',
- 'opts' => 'Basic Check (Hoses, Steering, Battery, Fuel Tanks, etc.)'
+ 'name' => 'General Check',
+ 'opts' => '<div class="service-checkbox"><b>General Check</b> - Remove boat from storage, fully charge batter (or replace if battery won\'t hold charge),
+ inspect water / fuel hoses, inspect electrical component connections, test trim, check fluid levels (top-off if necessary),
+ and conduct out-of-water test run. Note: This item applies only to outboards and sterndrives.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Complete Ignition Tune-Up (Cap, Rotor, Plugs & Wires - if necessary)',
- 'opts' => 'Complete Ignition Tune-Up (Cap, Rotor, Plugs & Wires - if necessary)'
+ 'name' => 'Oil Change',
+ 'opts' => '<div class="service-checkbox"><b>Oil Change</b> - Change oil, filter, and water separator (if applicable).</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Change Engine Oil & Filter (and water separator if necessary)',
- 'opts' => 'Change Engine Oil & Filter (and water separator if necessary)'
+ 'name' => 'Engine Tune',
+ 'opts' => '<div class="service-checkbox"><b>Engine Tune</b> - Replace cap, rotor, plugs, and wires as needed. Note: Plugs may be only replacement item on newer outboards due to absence of cap & rotor.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Extensive Test run (15 to 20 minutes)',
- 'opts' => 'Extensive Test run (15 to 20 minutes)'
+ 'name' => 'Launch & Test',
+ 'opts' => '<div class="service-checkbox"><b>Launch & Test</b> - Launch boat, briefly test-run, and fill with gas / oil. Note: Unless instructed otherwise, gas tank will only be filled if gauge reads below 3/4.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Fuel Injection Cleaning (Applies to both outboard & sterndrive EFI motors)',
- 'opts' => 'Fuel Injection Cleaning (Applies to both outboard & sterndrive EFI motors)',
+ 'name' => 'Fuel Injection',
+ 'opts' => '<div class="service-checkbox"><b>Fuel Injection</b> - Completely clean fuel injection system on applicable sterndrives and outboard motors.</div>',
),
),
- 'Outdrive & Gearcase' => array(
+ '<center><u>Outdrive & Gearcase</u></center>' => array(
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Lube U-Joints',
- 'opts' => 'Lube U-Joints'
+ 'name' => 'Water Pump',
+ 'opts' => '<div class="service-checkbox"><b>Water Pump</b> - Replacement is recommended every 2 years or 100 hours (whichever comes first).</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Change Water impellor',
- 'opts' => 'Change Water impellor'
- ),
- array(
- 'type' => 'checkbox',
- 'req' => false,
- 'name' => 'Check Trim & Tilt',
- 'opts' => 'Check Trim & Tilt'
- ),
- array(
- 'type' => 'checkbox',
- 'req' => false,
- 'name' => 'Check Boots',
- 'opts' => 'Check Boots'
+ 'name' => 'General Check',
+ 'opts' => '<div class="service-checkbox"><b>General Check</b> - Inspect bellows for weather checking / holes, examine anodes (replace if necessary), and test trim and tilt.</div>'
),
+ ),
+ '<center><u>Special Services</u></center><br><center>Please note that special services must be scheduled prior to our standard two-week launch request period.</center>' => array(
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Weld Skeg',
- 'opts' => 'Weld Skeg'
+ 'name' => 'Teak Care',
+ 'opts' => '<div class="service-checkbox"><b>Teak Care</b> - Clean teak, apply formulated brightener, and oil as necessary. Billed at $55.00 / hr.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Replace Anodes',
- 'opts' => 'Replace Anodes'
+ 'name' => 'Buff & Wax',
+ 'opts' => '<div class="service-checkbox"><b>Buff & Wax</b> - Clean exterior of boat, apply compound and buff, wash compound off, and apply wax to applicable surfaces. Billed at $55.00 / hr. Note: Typical 20\' boat requires roughly 16 hours.</div>'
),
array(
'type' => 'checkbox',
'req' => false,
- 'name' => 'Replace Upper Seals',
- 'opts' => 'Replace Upper Seals'
+ 'name' => 'Bottom Care',
+ 'opts' => '<div class="service-checkbox"><b>Bottom Care</b> - Scuff sand boat bottom and apply 1 coat of antifouling paint.</div>'
),
- array(
- 'type' => 'checkbox',
- 'req' => false,
- 'name' => 'Replace Lower Seals',
- 'opts' => 'Replace Lower Seals'
- )
- )
+ ),
);
$this->workTypes = $workTypes;
//var_dump($workTypes);exit;
'type' => 'textarea',
'req' => false,
'name' => 'comments',
- 'display' => 'Additional Issues, Comments or Directions'
+ 'display' => '<center><u>Additional Notes, & Instructions</u></center> <br> <center>Include any special comments for CM staff below</center>'
);
$e[] = array(
'type' => 'CAPTCHA_Image',